Schilbershnidt (Bohle) portable work surface

Home Forums Glass Fusing General Fusing Discussion Schilbershnidt (Bohle) portable work surface

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #10150
    JanneR
    Participant

    I love my work surface and the attached strip cutter but the pad is very worn with nicks, cuts, a bubble, and scratches. Bohle does not sell a replacement pad since the strip cutter is attached as part of the unit. I don’t want to buy a whole new unit — quite expensive, so I am looking for substitutes to either lay on top of the current pad or cut it off and attach the strip cutting unit to something else. Suggestions?

    #13365
    wordana
    Participant

    Could you lay a piece of the rubbery shelf paper over it? I’m not certain if it’s thick enough to help. I use this as a cutting surface on my table..

    Dana W

    Jester’s Baubles Fused Glass Designs

    http://www.jestersbaubles.com

    #13366
    JanneR
    Participant

    It’s worth a try. I’m also looking for a thin piece of linoleum that won’t interfere with the strip cutter and can be easily replaced.

    Thanks for your suggestion.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...