Saving fiber paper

Home Forums Glass Fusing General Fusing Discussion Saving fiber paper

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10341
    Dorisbrown1220
    Participant

    I was using Thinfire paper with no problems, but someone told me that if I used Paprus paper, it would last for several firings. My problem is that most often with a little bigger piece, the Paprus comes up when I pick up the glass. Is there a way to pick up glass that leaves the paper on the shelf?

    #13618
    wordana
    Participant

    It all depends upon the glass, as well as how hot you fuse. Opal glasses will usually stick to the shelf paper at full-fuse temps; clears and transparents are less likely. Use a base of clear and typically the glass will lift right off the paper.

    Dana W.

    Fused Glass Designs

    dba Jester’s Baubles

    http://jestersbaubles.blogspot.com/

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...