pot melt questions

Home Forums Glass Fusing General Fusing Discussion pot melt questions

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #9831

    I did a pot melt last night using Paul’s firing schedule.  When I opened the kiln several of the elements were hanging from the lid.

    Can I just put in more element pins to hold them in place if I decide to do another pot melt?

    Can I fire lower than 1700 if I use a longer soak?

    I’ve noticed that Slumpy’s and a couple of other places have the pre-drilled “pots” for pot melts.  How do they clean out these if they decide to change colors?  I know some people just use flower pots and it doesn’t matter…..just use a different pot.  Just wondering about these that are sold.





    You can go a bit cooler, and hold longer (the bottom temp will depend upon your kiln — probably no cooler than 1625). You really can’t get all the glass out of the container, so it’s suggested you have a different pot for each color (thus, the recommendation to use less expensive flower pots).

    Dana W.

    Jester’s Baubles Fused Glass Designs


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx