MR97 Replacement

Home › Forums › Glass Fusing › General Fusing Discussion › MR97 Replacement

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 11, 2015 at 1:07 pm #10290
    Vince
    Participant

    Relatively new to fusing I am; in a little over a year I have fired a little 4-7/8″ round, hand thrown kiln, over 1,000 times. It’s been quite the challange managing/creating firing schedules LOL, look forward to posting some pictures of successful projects.

    Ran into a problem MR97 supply has been interrupted; is there a comprable spray product out there that may be used mold release agent?

    October 13, 2015 at 3:03 am #13553
    Anonymous
    Inactive

    I prefer kiln wash (shelf primer) in an air brush to MR-97.  Much less expensive.


    Paul
    FusedGlass.Org
    Helios Kiln Glass Studio
    PaulTarlow.com

     

    October 30, 2015 at 2:39 pm #13554
    JKH
    Participant

    ZYP Coatings manufactures the exact same product under a different name — BN Aerosol Lubricoat. It is available here:

    http://www.zypcoatings.com/top-selling-boron-nitride-coatings/bn-aerosol-lubricoat/

    There are no supply issues with the ZYP product.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...