Made Puddles -now what

Home Forums Glass Fusing General Fusing Discussion Made Puddles -now what

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #10022

    Hi – I made some great looking “puddles”. They turned out in an oval shape, however I want to incorporate them into a flat dish.  I’m thinking clear bottom layer, then color glass with puddles down the middle??  The puddles do not have a straight side so butting them up against another piece of glass will leave a gap.  Can I also take all the puddles, lay them on a clear sheet and fuse into one big flat surface?  How high should I fire?  Thank you.Diane


    If your glass stack is greater than 2 layers thick and you fire to a high full fuse, the surface of the glass will level out as the glass attempts to be 1/4″ thick. Consider that as you lay out your design.


    Jester’s Baubles Fused Glass Designs

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx