Kiln advice

Home › Forums › Glass Fusing › General Fusing Discussion › Kiln advice

  • This topic has 1 reply, 2 voices, and was last updated 12 years ago by Anonymous.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 12, 2009 at 7:16 pm #9292
    flowertinker
    Participant

    I am using a studio-pro by Evenheat with a standard infinite control and as a learner I now realise babysitting a kiln  is going to take  up a huge amount of my time.

    Is it possible to have my kiln control changed from a standard infinite switch to an automatic control so I could have more precise control in the future and not need to sit for hours on a stool in the shed :(

    Any advice will be appreciated. Thanks 

    January 12, 2009 at 9:36 pm #11083
    Anonymous
    Inactive

    Yes – you can “upgrade”.

    The easiest way is a stand-alone controller.  It has a thermocouple that you insert through a hole in the side of the kiln (easily made).  You then plug the controller into the wall and the kiln into the controller.

    Orton has one for $350.

    http://www.ortonceramic.com/store/product.php?productid=16386&cat=256&page=1

    – Paul

     


    Paul
    FusedGlass.Org
    Helios Kiln Glass Studio
    PaulTarlow.com

     

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...