gluing glass to glass

Home › Forums › Glass Fusing › General Fusing Discussion › gluing glass to glass

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 6, 2013 at 12:38 am #9934
    clarkie
    Participant

    I have fused tiny bolts into cubes of glass and would like to attach the cubes to the back of a fused piece. I thought of all this after I had completed the piece! So – any ideas would be appreciated. I don’t want it to fall off. The fused piece is 3mm – 9 inches X 12 inches, although I would like to do some bigger and thicker pieces and use the same procedure.

    thanks!

    Clarkie

    February 8, 2013 at 6:02 am #12836
    Anonymous
    Inactive

    If either piece is transparent, UV glue is strong.

    Another option is hxtal glue (available from hisglassworks.com

    It is pricey but is incredibly effective. I’ve seen work that was glued with hxtal dropped and break – – but never on the glue joint.


    Paul
    FusedGlass.Org
    Helios Kiln Glass Studio
    PaulTarlow.com

     

    February 8, 2013 at 5:23 pm #12837
    clarkie
    Participant

    Thanks Paul!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...