Float Glass Full Fuse

Home Forums Glass Fusing General Fusing Discussion Float Glass Full Fuse

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #10459

    I’m attempting to do a full fuse on float glass in order to adhere some high fire wire jump rings to the for hanging; however, the rings won’t fuse to the glass.  Here’s my firing schedule, which I’ve tried twice now with an increase to temp and hold, but no luck.  What’s up?  Any help would be appreciated or will this just not work?????  THANK YOU!  —-Sabine

    Segment   Ramp Rate (ºF/hour)   Target (ºF)   Hold (minutes)
    1   250   1100   15
    2   200   1245   30
    3 9999   1510   20
    4   9999   1100   35
    5   150   900   0


    I have used these glasses these are one of the finest things to see around, I have been one of most oldest consumers of the glass, I have been working long time ago I would take coursework writing service uk as they have been best household item list companies providers.


    Segments with the ramps of the floating jumps on the flat glass are having the full fusing resting on the order. For firing schedule on the fuse glass you need to http://www.bestessays-writer.com/ website to conduct the appreciations.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx