float glass frits

Home Forums Glass Fusing General Fusing Discussion float glass frits

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9900
    beau
    Participant

    Can I used crushed Float glass to make frits.

    What about the tin layer on float glass?

    #12751
    Anonymous
    Inactive

    There is no guarantee that frit made from one piece of float is compatible with a different sheet of float (though they are).

    The tin residue on the tin side won’t stop the pieces from fusing – though it can increase devit and even react with enamels.

    Also, becaue float doesn’t flow easily when melted in a kiln, you’ll likely never lose the texture from the frit.



    Paul
    FusedGlass.Org
    Helios Kiln Glass Studio
    PaulTarlow.com

     

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...