Deep Kiln formed bowl molds

Home › Forums › FusedGlass.Org Website Help › Suggestions & Feedback › Deep Kiln formed bowl molds

This topic contains 4 replies, has 3 voices, and was last updated by  TerryC 5 years, 4 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 10, 2014 at 2:22 pm #10070

    juliestock
    Participant

    Does anyone know where I can buy deep bowls for fusing, similar to the ones use by Al Bray?  Preferably in U.K. but definately able to ship internationally.

    January 11, 2014 at 1:50 am #13182

    TerryC
    Participant

    Creative Ceramics (http://www.creativeceramics.eu) sells them. the instructions for the 3 step process is at http://www.creativeceramics.eu/docs/slumping_in_3_steps.pdf


     

    Terry Curtis

    January 11, 2014 at 4:29 pm #13183

    juliestock
    Participant

    Many thanks for this Terry.  I am on my way with this process now, wish me luck!

    January 11, 2014 at 9:46 pm #13184

    Babette
    Participant

    Bullseye sells these 3 step molds

     

    January 11, 2014 at 10:34 pm #13185

    TerryC
    Participant

    I learned how to use these from Karl Harron.  His method requires careful monitoring during the slumping phases.  If one side drops faster than another, you reach into the kiln (with proper protection!) to manuipulate the mold.  I haven’t figured out how to do it without a partner…my husband gets to be my spotter/lid lifter Smile

    Terry Curtis

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.

People Who Like Thisx

Loading...