Bead Door

  • This topic has 1 reply, 2 voices, and was last updated 9 years ago by Anonymous.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9825
    rpastore
    Participant

    I ordered a Paragon Fusion 16 about 2 weeks ago for slumping and fusing.  I added a bead door fo the order and am having second thoughts after I saw on the Paragon web site that the kiln will fire slower with a bead window.  I contacted Paragon and they verified this and also indicated that there could be a cold spot in the kiln from the bead door that could affect the piece.  I have never done flameworking but thought it would be something that I might do in the future so I ordered the bead door. At this point I am somewhat sorry and may try to have it removed from the order.  I was wondering what experiences anyone had with this.  Any advice would be appreciated.

    #12601
    Anonymous
    Inactive

    If you cannot change the order, you can probably put a brick insert where the window is to minimize the heat loss.



    Paul
    FusedGlass.Org
    Helios Kiln Glass Studio
    PaulTarlow.com

     

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

People Who Like Thisx

Loading...