Well, again, I’ve never
Home › Forums › Glass Fusing › General Fusing Discussion › Kiln › Well, again, I’ve never
September 23, 2010 at 5:54 pm #11730
Participant
Well, again, I’ve never worked with anything else. I usually just build on the shelf while it sits in the kiln. If your stuff is complex and you like to build at a worktable, then yes, it’s a bit tricky to then set the round shelf down in there, because you have little space for your fingers. Some kind of tool would help, I suppose. I bought a square shelf to use for that purpose, because it’s easy to set down in there, but it can only be about 7 inches square as mentioned.
Katherine T.