Temp for casting bottles
Home › Forums › Glass Fusing › General Fusing Discussion › Casting with Recycled glass › Temp for casting bottles
January 30, 2010 at 8:37 am #11475
Stephen RichardParticipant
You will need to use 850C for a long soak to get things flat and remove bubbles. A bubble squeeze at ca. 700C – 720C would also help. You will get a lot of devitrification, so the sanding is essential.
Stephen Richard
blogs at: http://www.verrier-glass.blogspot.com/ and http://www.glasstips.blogspot.com/
