Steel pipe for slumping
Home › Forums › Glass Fusing › General Fusing Discussion › Using Steel Tubes for Draping › Steel pipe for slumping
March 22, 2014 at 4:11 pm #13306
Participant
Yes cover the pipe with fibre paper – 0.5 mm at least. No point batt wash, as the steel will spall so badly. You need to advance in temperature slowly as the pipe drains the heat from the glass where it rests.
Stephen Richard
blogs at: http://www.verrier-glass.blogspot.com/ and http://www.glasstips.blogspot.com/