Put the whole back in the
Home › Forums › Glass Fusing › General Fusing Discussion › HELP- messed up big time › Put the whole back in the
January 19, 2009 at 5:07 pm #11086
Stephen RichardParticipant
Put the whole back in the kiln, supported on posts, fibre paper, or similar. Take the temperature up slowly to around 677C and the glass should drop off onto the shelf. If it hasn’t by the time you get to 677C, extend the soak.
Stephen Richard
blogs at: http://www.verrier-glass.blogspot.com/ and http://www.glasstips.blogspot.com/
