kiln wash
Home › Forums › Glass Fusing › General Fusing Discussion › kiln wash › kiln wash
January 1, 2011 at 9:34 pm #11296
Participant
I converted a 70 gallon plastic pickle barrel by cutting off one end and building a window into it as well. I use a small sandblaster called a “speed blaster.” It has a small reservoir for the blasting media (I use silicon carbide), which is a pain to continuously reload, but it doesn’t take much air pressure to work well. I have used this very inexpensive setup to blast fairly extensive projects. It works really well for getting rid of a bit of kiln wash.