If you coldwork your pieces
Home › Forums › Glass Fusing › General Fusing Discussion › Slumping and Fire Polishing at the same time › If you coldwork your pieces
April 2, 2014 at 2:37 am #13307
Participant
If you coldwork your pieces down to a 400 grit finish, it will polish out with slumping temps (kind of in between a matte and a full gloss. Works best on edges — it’s hard to get all the scratches out on a flat piece unless you are coldworking with a sandblaster!).
Dana W.
Jester’s Baubles Fused Glass Designs