I doesn’t really matter
Home › Forums › Glass Fusing › General Fusing Discussion › fusedeglass.org firing schedule › I doesn’t really matter
November 4, 2010 at 6:40 pm #11790
Stephen RichardParticipant
I doesn’t really matter whether you programm the kiln to shut off after 370C or not. UNLESS your kiln loses heat faster than the rate suggested as the fastest the glass can be allowed to cool. If your kiln cools more slowly, then you are not using any electricity anyway, so there is no problem.
Stephen Richard
blogs at: http://www.verrier-glass.blogspot.com/ and http://www.glasstips.blogspot.com/
