First, thanks for the kind
Home › Forums › Glass Fusing › General Fusing Discussion › Looking for eBook feedback › First, thanks for the kind
First, thanks for the kind words. I really do appreciate it.
As for your question, the solution may not be all that hard.
We have two strip cutters at Helios. Tthe first one I made with the final design (we won’t talk about what happended to the cutters that still had bugs to work out is bult onto a farily large bench. It is always out and available. The downside is that it does take up a fair bit of space.
Our second cutter (affectionately known as “the little stripper) is mounted to a 24 inch square piece of 1/2 inch plywood – something you can pick up already cut to size at any Lowes, Home Depot or similar store. When not in use, it stands on end, leaning against a wall in the corner. When we need more than one strip cutter, we simply put the little stripper on a table and it is good to go.
I hope this helps. If needed, I can post a photo.
Paul
Paul
FusedGlass.Org
Helios Kiln Glass Studio
PaulTarlow.com