Cutting Pattern Bars
Home › Forums › Glass Fusing › General Fusing Discussion › Fused Glass Saw › Cutting Pattern Bars
November 1, 2011 at 2:35 am #12241
bhawbakerParticipant
You will probably go through a lot of ring saw blades cutting pattern bars, and the replacements are expensive.
Try using a tile saw with a glass blade, such as http://www.harborfreight.com/25-horsepower-10-inch-industrial-tile-brick-saw-95385.html or http://www.homedepot.com/h_d1/N-5yc1v/R-100665659/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
