A sandblaster makes a great
Home › Forums › Glass Fusing › General Fusing Discussion › Waterjet cutting › A sandblaster makes a great
September 6, 2008 at 8:51 pm #10722
Inactive
A sandblaster makes a great poor-man’s waterjet. The raven in the piece below was cut by using a buttercut resist to mask the bird and then moving slowly around the edge with the blasting nozzle about 1/2 inch from the glass.
It took about 20 minutes using silicon carbide and a pressure pot setup.
Paul
FusedGlass.Org
Helios Kiln Glass Studio
PaulTarlow.com