Reply To: Vent Kiln During Cooling
Home › Forums › Glass Fusing › General Fusing Discussion › Vent Kiln During Cooling › Reply To: Vent Kiln During Cooling
April 7, 2019 at 1:18 am #14865
Participant
If I am firing 1″ square or round tiles, I turn my kiln off at about 750 degrees. I pull the peephole cone out then…I’ll come back and crack the lid about an inch….My tray is 20″ square. never had a problem. Bigger pieces I don’t vent until the temp is around 300….