Glue for glass

Submitted by Lioness on Wed, 02/25/2009 - 18:15.

Hi, I'm new to this site and not old with fusing 6 months. I have read the forums on glue for metals and will try the e6000. What I'm trying to glue to glass is glass. I'm making these glass rings that have a fused top and the band is Pyrex. And the stuff I was using was working well until recently and it may just be time to get a new tube. I am using Goop. Before I do, I thought I would ask for suggestions. I have scratched both top and bottom well, After reading I believe it could be the tube is older because it wasn't till recent the tops have popped off but I can't sell product like that.

Thanks for this site it's already been alot of help    Laughing Love today!

 

0
‹ Fusing in a Microwave Kiln sharp edges ›

Hi there :) There was a

Submitted by Paul Tarlow on Wed, 02/25/2009 - 18:30.

Hi there :)

There was a lengthy thread on this not long ago here.

You may want to start with that and see if it helps.

----------------------
Paul
FusedGlass.Org
Helios Kiln Glass Studio
PaulTarlow.com

 

I am not aware of goop, but

Submitted by jeffreyfrog on Fri, 03/27/2009 - 07:15.

I am not aware of goop, but have been recommending epoxy for glass as adhesive. But the link that Paul put is useful for you.

Jeffrey W                                                                                                                              New York Auto Glass

 

My suggestion for you would

Submitted by mhon on Thu, 10/08/2009 - 17:11.

My suggestion for you would be to use a new one. It's better to be sure and safe than to have regrets at the end.  Thanks for the share though and good luck.auto glass replacement quote

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.