Removal of Boron Nitride (Zyp) spray from fused glass pieces using the pate de verre technique.

Hi Fellow Fusers!

Need your help and suggestions concerning removal of the white reside (Zyp spray) that was recently left on my fused glass pieces.  Glass and molds uses were as follows: Lily pad mold and black BE frit (90 COE), and frog mold where I used clear rainbow dichro (as a Mosaic element) and then filled with black BE (90 COE frit).  Very frustrated with Zyp!  Thanks in advance for your advice and suggestions.

zyp

If really embedded, you may not be able to polish out.  But for more sufferficial surface build-up, I've had reasonably good results with common 409 cleaning spray.  Spray on, let sit for 5 minutes.  Repeat if you seem to be making head-way. This issue made us totally give up on ZYP and boron in general.  Life has been much better (for me & spouse) with better kiln wash and kiln wash technique. The haze left by boron is unacceptable on most pieces.

glass

I would love to watch the whole process of glass removal which would be an amzing experience to see its one of the greatest stuff to witness in coming few weeks as well as the Essay Writing Services all the time I can get through long term work in very short termed manner as well

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.