Making fused glass circles

Home Forums Glass Fusing General Fusing Discussion Making fused glass circles

This topic contains 1 reply, has 2 voices, and was last updated by  wordana 3 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10390

    4greenback
    Participant

    Hello, I am fairly new to glass fusing and tonight tried to make circles.  I cut 1″ square to make circles which I would then make into flowers.  I thought when fired at full fuse (1500 degrees) they would end up as circles.  When finished cooling they were still square with rounded sides.  What did I do wrong?

    #13683

    wordana
    Participant

    Make sure to offset the top one a quarter turn to the bottom. You will need to fused fairly hot/long to get them to round out.

    Dana W.

    Fused Glass Designs

    dba Jester’s Baubles

    http://jestersbaubles.blogspot.com/

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

People Who Like Thisx

Loading...