Firing schedule – 3 layers

Home Forums Glass Fusing General Fusing Discussion Firing schedule – 3 layers

This topic contains 1 reply, has 2 voices, and was last updated by  wordana 3 years, 8 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #10387

    Overthemoon
    Participant

    I have a 12″ diameter opaque fused piece with and additional opaque layer which is a tacked mosaic piece covering about 50% of the surface. My question is, do I consider this a 2 layer or 3 layer piece when slumping?

    #13679

    wordana
    Participant

    At least four layers, maybe 6.

    One layer for the 3 mm 12″ circle.

    One layer for the 3 mm mosaic piece (unless this is a 3 mm piece w/3 mm mosaic pieces tack fused… I don’t quite understand from your description. If so, then it’s 2 layers).

    Add those up and then multiply by 2 because it’s a tack fuse.

     

    Dana W.

     

    Fused Glass Designs

    dba Jester’s Baubles

    http://jestersbaubles.blogspot.com/

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.

People Who Like Thisx

Loading...